ASSEMBLY INSTRUCTIONS FOR WOOD REVERSIBLE BOARD

1. LAY BOARD AND OTHER PARTS ON FLAT SURFACE.

2. ATTACH 3” STUDDED BRACKET TO NOTCH IN EACH SIDE OF BOARD – INSERT SCREWS IN PREDRILLED HOLES.

3. SLIP LEGS OVER 3/8” THREADED STUD, PUT ONE WASHER, SCREW ON PLASTIC KNOBS.

4. ATTACH BLACK METAL BRACKETS TO BOTTOM OF EACH END OF CHALK TRAY.

5. ATTACH OTHER LEG OF BLACK METAL BRACKETS TO UPRIGHT LEGS AT INDENTATION INDICATED ON SIDE LEGS THIS DOES NOT NEED TO MATCH UP EXACTLY AS SCREWS PROVIDED WILL ENTER WOOD WHEN USING A GOOD QUALITY PHILLIPS SCREW DRIVER.

6. SCREW CHALK TRAY TO UPRIGHT LEG ON EACH SIDE.

7. IF CASTERS WERE ORDERED, PUT METAL INSERTS IN BOTTOM OF LEGS, TAP INSERTS FIRMLY WITH HAMMER SO THEY ARE SECURELY IN LEGS. THEN INSERT CASTER UNTIL YOU HEAR THEM LOCK.

8. CARE SHOULD ALWAYS BE TAKEN WHEN MOVING THE BOARD AND IN TURNING IT FROM ONE SIDE TO THE OTHER.

9. IF YOU HAVE ANY QUESTIONS PLEASE CALL OUR FACTORY AT 1-800-221-7875