The Aristocrat Line

Excellence In Communication Products
-----------------------------------------------------------------------------------------------------------------------
===============================================================================
 

WALL MOUNTING INSTRUCTIONS for ALL BOARDS

(PLEASE READ BEFORE STARTING)

  1. Determine desired height and secure lower brackets to the wall. It is  best for the screws to be at the top of the slots of these lower brackets.

  2. Set the BOARD on the lower brackets and mark for the top bracket locations.

  3. Snug top brackets to the wall as marked in Step 2.  Screw for the upper brackets should be located in the centers of the bracket slot.

  4. Set BOARD into position and tap top brackets snug against frame.  Mark frame of BOARD where the screws will secure in the bracket  lip.  Remove BOARD and tighten all bracket screws.

  5. Drill small pilot holes in BOARD frame as marked in Step 4.

  6. Set BOARD back into place, install screws into the brackets and pilot holes and tighten.

 

IMPORTANT!!

WARRANTY VOIDED IF PROVIDED BRACKETS ARE NOT USED PER ABOVE INSTRUCTIONS.

DO NOT DRILL THROUGH FACE OF PANEL OR FRAME.

CAUTION: (for aluminum tray only)
The gray vinyl tray end caps which are supplied must be installed on both ends of the aluminum tray before use.