The gray vinyl tray end caps which are supplied
must be installed on both ends of the aluminum tray before use.

• ERASE YOUR BOARD WITH A CHALKBOARD ERASER OR SOFT CLOTH AFTER EACH DAY USE

• OLD MARKS MAY BE REMOVED BY MARKING OVER THEM WITH ANOTHER MARKERS

• AFTER A PERIOD OF USE, INK RESIDUE MAY DEVELOP ON THE SURFACE.  SIMPLY USE A MILD, NON-ABRASIVE, SPRAY CLEANER, RINSE WITH CLEAN WATER AND DRY WITH A SOFT CLEAN.  

ERASABLE MARKERS

• THE ERASABLE MARKER HAS A SOLVENT BASE THAT DRIES QUICKLY.  THIS IS THE KEY TO ITS ERASABILITY.  THE MARKER SHOULD BE TIGHTLY CAPPED WHEN NOT IN USE.

• IF THE TIP DRIES OUT, IT MAY BE POSSIBLE TO REACTIVATE THE INK.  CAP THE MARKER, TURN IT UPSIDE DOWN AND SHAKE VIGOROUSLY UP AND DOWN FOR SEVERAL SECONDS.  STORE IT UPSIDE DOWN OVERNIGHT.

• USE THE MARKER ON THE ERASABLE MARKER BOARD OR GLASS, IT IS NOT RECOMMENDED FOR OTHER SURFACES.