The Aristocrat Line

Excellence In Communication Products
-----------------------------------------------------------------------------------------------------------------------
===============================================================================

 

       CHALKBOARD CARE AND CLEANING

CAUTION:  ( for aluminum tray only)
 The gray vinyl tray end caps which are supplied
must be installed on both ends of the aluminum tray before use.  

BREAKING IN

  • FOR BEST RESULTS, IT’S ESSENTIAL TO BREAK-IN THE CHALKBOARD.

  • COVER THE ENTIRE SURFACE WITH CHALK.   USE THE SIDE OF A PIECE OF WHITE, DUSTLESS CHALK.    NEVER USE CHALK WITH GLAZED, HARD SURFACE.

  • WORK THE CHALK INTO THE SURFACE USING AN ALL-FELT ERASER.  REPEAT THESE STEPS AGAIN

  • WIPE THE BOARD CLEAN WIT A SOFT, DRY, LINT-FREE CLOTH OR CHAMOIS.

CLEANING

  • FOR BEST RESULTS, “DRY” CLEAN THE CHALKBOARD.

  • ERASE THE ENTIRE SURFACE WITH AN ALL-FELT ERASER AND WIPE WITH A SOFT, DRY, LINT-FREE CLOTH OR CHAMOIS.

  • TO REMOVE STUBBORN STAINS, SUCH AS FINGERPRINTS, CRAYON, PENCIL MARKS, ETC., USE WATER AND A MILD, NON-ABRASIVE, NON-OILY CLEANER.  RINSE WITH WATER AND DRY IMMEDIATELY.

 

A NOTE OF CAUTION: 
 WATER WILL NOT HARM THE BOARD SURFACE, BUT IT DOES COMBINE WITH THE CHALK TO PRODUCE A GLAZED, SLICK FINISH THAT IS UNFIT FOR WRITING.  THIS CONDITION CAN DEVELOP ON ANY CHALKBOARD SURFACE.  AFTER WATER IS USED, IT IS IMPORTANT TO DRY THE SURFACE IMMEDIATELY AND REPEAT THE BREAK-IN INSTRUCTIONS.